How To Fix External Hard Drive I/O Device Error in Windows 11/10
External Hard Drive I/O Device Error in Windows 11/10: Recently, Windows 11 and 10 users are experiencing external hard drive I/O device errors. The error prevents you from accessing your data on your drive USB flash drives SD cards, and other storage devices. I/O device errors are the most irritating and frustrating because it blocks users from accessing external drives. In the present, however it is on the minds of users that do we have a fix? Fortunately, yes. We’ve gathered detailed information and suggestions for fixing this issue that we have provide on this Troubleshooting Guide. Here’s everything you need to know to solve errors with the External Hard Drive I/O device problems on Windows 11 and 10.
Fix: Windows 11 and 10 External Hard Drive I/O Device Error
I/O device error is the abbreviation of I/O device error is basically a shorthand for. It is as the name implies the error is typically experienced with external devices like hard disks, SD cards USB Flash drives, DVDs or DVDs, when you try to do write or read on the device on Windows 11 and 10. Most often, users trying to access files will receive an error message from the I/O device that states, “The request could not be performed due to an I/O device error.”
Also Read: How To Update Office 365 in Windows 11/10
In addition, to find solutions the issue, we must know the causes of external Hard Disk I/O device errors. The following are the most common reasons for I/O device malfunctions:
- Older drivers
- Incompatibility of hard drive when using Windows 11 and 10
- Failure of the write function on CD/DVD and USB port
- Untidy SATA cord, or USB
- A hard drive that’s physically damaged
To solve issues with the External Hard Drive I/O device error in Windows 11 and 10, you can try the following fix suggestions:
Fix 1: Common Fixes
Before attempting other fixes You should work on fixing the issue with the I/O device by following the steps below:
- Restart your computer
- Try regaining access to an external driver.
- Is the issue still present? Try connecting to the driver using a different PC and determine if the hard drive is operating properly or not.
If you’re still having trouble with an I/O device issue following the above methods you can try the other solutions below.
Fix 2: Check all Cables Connection
In general External I/O device issues with hard drives result from cables and cords as they connect external hard drives to the computer. This is why you must be sure to examine the connection of the cables with your computer. It is important to ensure whether all the cables aren’t loosely connected to both hubs and ports on your computer. Additionally, replace the cable and determine if the issue is related to your cable. If you are still not able to fix the issue try connecting the external drive into another port on your system.
Fix 3: Reinstall the Drivers
As we have already mentioned, outdated drivers are the primary reason for External Devices with Hard Disks I/O errors on Windows 11 and 10. This is why you should update your drivers to correct the problem. Try reinstalling the drivers. It could be difficult to you but you’re advised to try. After installing or updating drivers, ensure that you restart your computer and refresh it properly.
Fix 4: Change the Drive Transfer Mode
It is important to remember the fact that Operating System cannot transfer data from a device to a drive in the event that the mode of transfer is not correct. To change the mode of transfer it is possible to do the following:
- To begin, press Windows + X and then select Device Manager from the drop-down menu.
- Now, you must extend the capabilities of your the capabilities of IDE to accommodate ATA/ATAPI controllers.
- There is an open subset shows the various IDE channels for ATA/ATAPI.
- Then, right-click on the channel to which you want to connect the drive, and select the Properties.
- It is your secondary IDE channel.
- Then, click on then the Advanced Settings tab and choose the PIO option from the box for transfer modes. The same goes is the device that will represent the correct drive.
- The device you are using is zero. Then click OKand quit all.
The next step is to check the drive and determine whether the error message has been eliminated or not.
Fix 5: Check & Repair Device in Command Prompt
Still, I/O error message appearing? Try this last, but not the least solution. If you want to check and repair the device at Command Prompt, follow these steps:
- Step one is press Windows+X.
- Now, click the Command Prompt from the menu.
- You need to Click Yes to allow OS to open it’s Command Prompt as administrator.
- If the command prompt appears then start typing the command chkdsk: G:/f /r. You should copy and paste this so that you don’t make errors.
NOTE: Here, G represents the letter drive. It is recommended to replace it by your drive letter.
These are options to fix your External Hard Drive I/O device error in Windows 11 and 10. We hope you’re not receiving I/O device message of error. This is all we have to say about this tutorial, guys. If you have any questions that you’re not sure about please post them in the comments section. In addition, click here to learn more interesting tutorials.