Red Dead Online editions will not receive major updates to content through Rockstar Games because developers are developing existing modes and resources in order to provide improvements rather than just offering themed content. However, players are in love with the primary Red Dead Redemption 2 title as an integral component of the. However, some players are facing issues with Red Dead Online (RDR2) Error: Can’t Connect to Server.

Yes! It happens when players attempt to enter playing the Red Dead Online game mode or try for connection to RDR2 servers. This is among the most frequent and widespread issues in the Red Dead Online (RDR2) players due to server downtime, the poor internet connection, issues with the game’s files, etc. Sometimes, closed NAT settings restricted open ports, restricted DNS servers, and so on may be the cause.

Fix: Red Dead Online (RDR2) Can’t Connect to Server

It’s highly recommended that you follow the below troubleshooting steps to fix this issue by hand. Rockstar Games Support officially suggested the solutions below and a lot of users affected found them helpful. So, with no further time on this, we’ll dive into the details.

Also Read: Best Mods for Red Dead Redemption 2

1. Check the Rockstar Games Service Status

In the beginning, look over first the Rockstar Games Services Status webpage to make sure there’s no outage of service or scheduled maintenance. If you find that the Red Dead Online Status is in operation and is running smoothly according to the status, you should move on to the next procedure. If there’s a problem in the servers, you can wait for a few hours before you examine the status once more. Try playing your Red Dead Online game at a time that is not peak.

2. Make sure you are connected to the Internet Connection

Examine your internet connection and determine whether it’s functioning or not. An unstable or weak internet connection can cause slow loading or problems with connectivity to servers. It’s best to call your ISP to improve the speed of the network or address the technical issue relating with your Internet Protocol address. Sometimes, upgrading your current service to better package could be helpful.

Consider using the Giga Fiber connection for better stability and faster data speeds. If you’re connected to a Wi-Fi network and you’re not getting the best results, try wired (Ethernet) connection, or reverse the problem. Rockstar Games Support recommends at minimum 1 Mbps bandwidth for upload and 7.5 total Mbps for download in order to enjoy an improved gaming experience with Red Dead Online. You can use any online speed testing tool to confirm that you have the speed you want.

3. Check the Open Network Ports

Red Dead Online requires the following ports to be opened according to the gaming device you are using. Open ports differ between PC, Xbox One, and PlayStation 4. It is recommended to set these ports to be open on your router’s settings for improved performance. If you’re not connected to Wi-Fi or aren’t sure how to do it, be sure you get in touch with your Internet service provider for technical assistance.

For PC:

• Port 6672 (UDP)
• Port 61455 (UDP)
• Port 61457 (UDP)
• Port 61456 (UDP)
• Port 61458 (UDP)

Also Read: How to Fix MultiVersus Fetching Product Error

For Xbox One:

• Port 88 (UDP)
• Port 53 (UDP and TCP)
• Port 3544 (UDP)
• Port 4500 (UDP)
• Port 500 (UDP)
• Port 3047 (UDP)
• Port 6672 (UDP)
• Port 61455 (UDP)
• Port 61456 (UDP)
• Port 61457 (UDP)
• Port 61458 (UDP)
• Ports 30211-30217 (TCP)

For PlayStation 4:

• Port 465 (TCP)
• Port 983 (TCP)
• Port 1935 (TCP)
• 3478 (TCP)
• 3479 (TCP)
• 3480 (TCP)
• Port 3478 (UDP)
• Port 3479 (UDP)
• 10070 – 10080 (TCP)
• Port 6672 (UDP)
• Port 61455 (UDP)
• Port 61456 (UDP)
• Port 61457 (UDP)
• Port 61458 (UDP)
• Ports 30211-30217 (TCP)

4. Check the NAT Settings (Consoles Only)

The term Network Address Translation (NAT) is the process of mapping an internet protocol (IP) address to a different one, by changing the headers of IP packets while in transit by the router. This is primarily used to enhance the security of your network and reduces the number IP addresses that an organization has. However, sometimes the NAT type might be shut for your IP address and could cause issues with server connectivity because it blocks continuing connections.

NAT Type Definitions:

1. OPEN: Can play games using any type of NAT.
2. Moderate: Can play games using moderate or open NAT types.
3. STRICT: Can only play games using open type NAT.

It is recommended to select your NAT type to Open NAT type to reduce problems with connectivity to servers online during gaming or streaming significantly. Because you can see that the NAT type issue is more apparent in gaming consoles it is possible to test NAT type by following the steps below.

Xbox One NAT Type Settings:

• Navigate to your settings menu of your Xbox One console.
• Select for Network and then head over into the Current Network Status section.
• Here, you will be able to see the the NAT Type Settings.
• If you are using NAT Type 2/3 (Moderate/Strict) is set, then be sure that you switch the type to 1 (Open) through the router settings. Alternately, you can call your ISP to get technical support.

5. Clear Cache (Xbox One)

It is important to note that the Xbox One console needs to clear temporary cache information occasionally to allow the system in order to function properly. Because it doesn’t come with an option that is specifically designed to clear the cache, follow these steps for clearing the cache from your Xbox One console:

Also Read: How To Fix Roblox Teleport Failed Unknown Exception Error

• Switch off your Xbox One console properly.
• After the LED indicator light are off on the console, be sure to disconnect the power cord from the back of the console.
• Wait at least one minute and then reconnect the power cord to the console.
• Then, turn on the console, then hit the power button in order to start the system.

6. Power the Wi-Fi router

Sometimes, just restarting the device or game or switching the internet connection could not be sufficient due to an issue in the router’s Wi-Fi. If that is the scenario, you must use the power cycle technique for your Wi-Fi router in order to address the internet connectivity problems. For this, follow these steps:

• First, turn off the router by disconnecting it from its power source.
• When the LED indicator stops blinking, disconnect the power cable from the router.
• Wait for about 5 minutes, then connect the power cable to the router.
• Connect the router to the internet and look for Red Dead Online server connectivity issue.

7. Disable Antivirus Program on PC

If you’re still having problems in issues with the Red Dead Online server connectivity issue on your PC , ensure that you disable your antivirus program temporarily so that you can check the issue. It could also be that your antivirus program is operating extremely hard to block current connections and hinder games from properly synchronizing. For this:

• Click on the Windows + I keys to start Windows Settings..
• Go to Update and Security > click to open Windows Security from the left pane.
• Go to the section for threat and virus protection > click for manage settings.
• After that, you’ll have to disable your Protection in real time switch.
• If asked, click “Yes” to continue.
• After you have completed the process, you are able to attempt to launch your Red Dead Online game once more to determine if the issue is still there.

8. Change Domain Name Servers (DNS) to Public

It is also recommended to consider changing the current DNS address of your router or gaming device to an open DNS address to ensure greater reach and higher connectivity speeds. The Google DNS address is quite well-known and widely used the globe for public DNS can be tried.

For PC:

• Click on your Control Panel > Network and Internet > Network and Sharing Center > Change the adapter settings.
• Just right click upon the network connection that is active > Choose the Properties.
• Then, choose Internet Protocol Version 4 (TCIP/IPv4) in the drop-down menu. Click the Properties.
• Pick Use the DNS server addresses below and then enter 8.8.8.8 to select the preferred DNS server addresses..
• Enter 8.8.4.4 to get your Alternative DNS Server addresses..
• After that, click “OK” to save the changes. reboot the PC and play the game.

Also Read: Ghost Recon Frontline was canceled – Explained

For Wi-Fi Router:

• Log in to Your connected Router page using the internet browser.
• Click WAN > enter you desired DNS Server address (8.8.8.8).
• Enter the alternative DNS servers (8.8.4.4) • Make sure you save modifications.
• After this, you can reboot your router, and then check the status of Red Dead Online. Red Dead Online game.

For Xbox One:

• Access the guide menu by pressing the Xbox button on your controller.
• Select and select the System tab from the right, then select the Settings.
• Click the Network > > Select network settings.
• Click on the Advanced setting.

Please note: Make sure to note down your current DNS server addresses on the screen to make backup (if there is a problem you are unable to change it back to the old DNS)

• Choose the DNS setting > Click manual.
• Simply enter 8.8.8.8 for the Primary DNS address and 8.8.4.4 for the Secondary DNS address..
• After that, restart the console in order to change the results.

For PlayStation 4:

• Click on Settings > Select Network. settings menu and then select the Network option..
• Then, click Create an Internet Connection > Select Wi-Fi or LAN (depending on the type of connection you are using).
• Select Custom > Select IP Address Settings to Automatic.
• Set DHCP Host Name to Do Not Specify > Select DNS Settings to Manual.
• Enter 8.8.8.8 as primary DNS and 8.8.4.4 for Secondary DNS. > Click the next.
• Set MTU Settings to Automatic > Set Proxy Server to Do Not Use.
• After that, restart the console in order to apply the changes.

9. Verify and Repair Game Files on PC

Also, you should check and fix the game files on your computer as missing or corrupted game files can cause problems in the game’s launch and connection to the server. It’s better to check and fix your game’s files through the game launcher you’re using. To do so:

For Steam:

• Start your Steam client and then go to the LIBRARY.
• Click right-click to open Red Dead Online in on the left side.
• Select Properties > Go to LOCAL FILES.
• Then, click Verify the integrity to game file and wait until the process is completed.
• After that, be sure you reboot your PC to take effect of the changes.

For Epic Games Launcher:

If, for instance, that you’re running the Epic Games Launcher and you’ll be able to take the next steps in order to resolve issues with the Red Dead Online server connectivity problem.

• Open Epic Games Launcher > Go to Library.
• Select the three dots icon right next to Red Dead Online.
• Click Check and then wait until the procedure to complete.
• After that, be sure that you restart the PC to make the changes effective.

For Rockstar Games Launcher:

• Launch your Rockstar Games Launcher on your computer.
• Make sure you log in to the account. Then, go to settings.
• Choose your Red Dead Online game from the list of My games that I have installed to the left side.
• Choose Verify Integrity under the Verify integrity of game files option in the right side.
• The process will be completed. A notification will pop up verifying your game and you are now able to play.
• Launch the game and then check for the issue.

10. Contact Rockstar Support

If none of the solutions did the trick, make sure you get in touch with Rockstar Support Support RDR2 to report to the similar problem. It is recommended to create an support ticket in order to get an earlier resolution since the experts will look at the issue more closely. Although it is true that the Rockstar Games team is dedicated enough to improve and scale the servers of the game in order to handle the overwhelming the number of active players simultaneously, or occasionally technical issues can be a problem for players mainly.